Innovative product development eliminates pacing leads by stimulating the heart through wireless transmission of energy.
Cambridge Consultants, collaborated with start-up company EBR Systems to develop the world’s first wireless pacing system. With cardiac stimulation leads considered the weak point in pacemaker systems, the Wireless Cardiac Stimulation system (WiCS) uses a leadless electrode to convert mechanical energy, wirelessly transmitted from an ultrasonic pulse generator, into electrical energy which is used to pace the heart as part of Cardiac Resynchronization Therapy (CRT).
Current CRT pacemakers or defibrillators are implanted in patients with chronic heart failure requiring both the left and right ventricles to be paced. Such devices require the implantation of three leads into the heart, one of which involves painstakingly threading a lead through a difficult and complex route running from the right atrium of the heart, out of the heart and into the coronary sinus, a vasculature structure on the outside surface of the heart to the left ventricle.
WiCS overcomes these problems by leveraging advances in energy harvesting microelectronics. A very small leadless electrode is implanted in the desired location within the left side of the heart. In its first generation, WiCS works in conjunction with a conventional pacemaker/defibrillator, sensing the electrical pacing pulse of the pacemaker from the right ventricle. The pulse generator then transmits an ultrasonic pulse to the implanted receiver, which converts the sonic energy into electrical energy to pace the left ventricle in synchronicity with the right.
Using its deep knowledge of integrated circuit (IC) design, Cambridge Consultants helped EBR define the system architecture which could be realised with modern silicon chip technology. Power consumption, size and safety are critical in pacemaker applications, and the team at Cambridge Consultants developed advanced low-power circuits to interface with the ultrasonic transducers and heart monitoring sensors.
With reliability critical, coupled with the need for sophisticated signal processing, Cambridge Consultants created two state-of-the-art mixed-signal Application-Specific Integrated Circuits managed by its powerful XAP4 processor to form the core of the WiCS pacing system. During the development, Cambridge Consultants created a full system hardware emulator of the final ASIC so that the other system elements and the software could be designed and fully tested over a year before prototype ASICs were available. This approach dramatically reduced the overall time of the development and enabled EBR to ensure that the system would work as envisaged before committing to the costly and time-consuming manufacture of final product.
WiCS is the first leadless system to be successfully implanted in early human clinical trials at leading centres in Europe. This platform technology will ultimately eliminate all pacing leads and deliver superior cardiac pacing therapy through its flexibility in where the electrode can be placed.
Eliminating the lead in the left side of the heart presents a major breakthrough in pacemaker design, and brings new hope for over 2.2 million advanced heart failure patients worldwide, who can benefit from CRT therapy. It also provides a life-saving option for those patients who do not benefit from CRT therapy, either because of the complexity of the procedure, or the limitations of the current technology.
Allan Will, CEO of EBR Systems, commented: “The WiCS system represents a huge breakthrough in pacemaker technology, not only in how we treat chronic heart failure patients today, but in eliminating leads and enabling site selected pacing locations in the heart for a wide variety of cardiac pacing applications. Many of the complications and reliability failures of pacemaker systems are attributed to leads. By eliminating leads, we can address the problems which come with them, and advance cardiac pacing therapy for all patients.”